Language Neutral Windows 7 Hotfix Downloads
4,205 files
-
Windows6.1-KB3125574-v4-x86.msu
By cgthamm
KB3125574 - Convenience rollup update for Windows 7 SP1 and Windows Server 2008 R2 SP1
NOTE: You MUST install KB3177467, available from the Microsoft Download Center, before installing this rollup update.
NOTE: You may want to download and install KB3139923-v2, available from the Microsoft Download Center, after installing this rollup update. Its original version is included in the rollup update, and it has since been updated to version 2. You can alternatively have Windows Update install it for you.
NOTE: There are several known issues with this rollup update, for which Microsoft has now provided resolutions. Please refer to the aforementioned Knowledge Base article for details and instructions.
Additional Known Issues:
1. Windows Update may return error 0x80240019 the first time you check for updates following the installation of this rollup update. Should this happen to you, simply wait a few minutes and check for updates again.
2. Windows Update may not be able to successfully finish checking for updates, no matter how long you let it run. Should this happen to you, temporarily disable automatic updating, restart your computer, and manually download and install the following update (available from the Microsoft Download Center):
KB3161608 - June 2016 update rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Don't forget to re-enable automatic updating afterwards.
3. Microsoft Office 2010 doesn't start when EMET is enabled. The solution is to download and install the June 2016 update follup for Windows 7 SP1 and Windows Server 2008 R2 SP1 (the same one as for Additional Known Issue 2, above). This Known Issue is documented by Microsoft here:
KB3163644 - Microsoft Office 2010 doesn't start when EMET is enabled in Windows 7 or Windows Server 2008 R2
4. Configuring updates may hang at 13% if certain USB devices (e.g. headsets) are connected when you install the rollup update. If this happens to you, let it timeout and roll back (this will take time -- be patient). Worst case, Configuring updates may freeze, in which case you'll have to power down your computer to have it roll back successfully. Once it has rolled back, unplug all USB devices except for mouse and keyboard, and re-install the rollup update. (Alternatively, you can remove any unnecessary USB devices before installing the rollup update and avoid this issue altogether.)
Additional information regarding Microsoft's change in servicing model for Windows 7:
Microsoft has changed the servicing model for Windows 7 to make it more like the servicing models it introduced in Windows 8, 8.1, and 10. Specifically, this means that instead of releasing hotfixes, Microsoft will be releasing monthly update rollups that contain all the fixes that would have been released as individual hotfixes.
(Editorial: In general, this is a good thing, as it makes it easier to build and maintain OS deployment images. On the down side, if there is a bug in an update rollup, you are stuck uninstalling the entire rollup, as opposed to just the hotfix with the bug.)
Since this Convenience update rollup was released, there has been a correction to one of the hotfixes included in it (kb3139923-v2). Microsoft also released the May 2016 update rollup (KB3156417). Beginning with the June 2016 update rollup (KB3161608), Windows 7 update rollups became cumulative (i.e. the July 2016 update rollup (KB3172605) includes all the fixes in -- and replaces -- the June update rollup.
Updated 2016-08-17: Microsoft has released the August 2016 hotfix rollup (KB3179573). In yet another case of the right hand being clueless as to what the left hand is doing, this hotfix rollup (like the May hotfix rollup) is NOT cumulative, and must be installed in addition to the other post-KB3125574-v4 updates. Here is the Knowledge Base article for KB3179573:
KB3179573 - August 2016 update rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Further, this hotfix rollup corrects a problem in SMB, so I took a look around for other recent Knowledge Base articles that discuss SMB issues, and found this:
KB3181029 - SMB file server share access is unsuccessful through DNS CNAME alias
In the Troubleshooting section, Microsoft still recommends applying KB2775511 and its post-requisite hotfixes. To do this successfully, you should apply them before KB3125574-v4.
Updated 2017-02-28: Since I last updated this article, Microsoft released a servicing stack update for Windows 7:
KB3177467 - Servicing stack update for Windows 7 SP1 and Windows Server 2008 R2 SP1: September 20, 2016
Servicing stack updates should always be deployed as soon as possible after they are released. Microsoft also released an additional non-cumulative update rollup:
KB3185278 - September 2016 update rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Starting in October, 2016, update rollups for Windows 7 became cumulative. As a hotfixer, I am interested by the cumulative updates that include both security updates and hotfixes. Microsoft has designated these as Security Monthly Quality Rollups. The most recently released one is:
KB3212646 - January 2017 Security Monthly Quality Rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Microsoft initially had a few problems making the update rollups cumulative. Of particular note, there were issues with supersedence. These now appear to be resolved, and hotfixers can keep their systems up-to-date by installing the most recent Security Monthly Quality Rollup.
-----
What does all of this mean in practical terms? Say you wanted to streamline your Windows 7 installation process. If you choose to follow Microsoft's new servicing model (including its ongoing recommendation to install KB2775511) for Windows 7, start with Windows 7 SP1, and install all of the following:
KB3177467 (the most recent Servicing Stack for Windows 7)
KB2775511 (the enterprise hotfix rollup)
+KB2581608 (to automatically apply a required registry entry, which is not included in the enterprise hotfix rollup)
+KB2752259 (to automatically apply a required registry entry, which is not included in the enterprise hotfix rollup)
+KB2732673 (a post-requisite for the enterprise hotfix rollup)
+KB2728738 (a post-requisite for the enterprise hotfix rollup)
+KB2878378 (a post-requisite for the enterprise hotfix rollup)
KB3125574-v4 (the April 2016 Convenience update rollup)
+KB3139923-v2 (a hotfix that was included in KB3125574-v4, but that has updated since its release)
KB3156417 (the May 2016 update rollup)
KB3172605 (the July 2016 cumulative update rollup)
KB3179573 (the August 2016 update rollup)
KB3185278 (the September 2016 update rollup)
KB3212646 (the January 2017 Security Monthly Quality Rollup)
With 14 updates/hotfixes, you get a basic up-to-date Windows 7 installation that will work well for many users. You could then install additional updates and hotfixes that you want that are not included in KB3125574-v4. (For example, I install the security updates for Internet Explorer and the hotfixes for Remote Desktop.)
3,688 downloads
Updated
-
Windows6.1-KB3125574-v4-x64.msu
By cgthamm
KB3125574 - Convenience rollup update for Windows 7 SP1 and Windows Server 2008 R2 SP1
NOTE: You MUST install KB3177467, available from the Microsoft Download Center, before installing this rollup update.
NOTE: You may want to download and install KB3139923-v2, available from the Microsoft Download Center, after installing this rollup update. Its original version is included in the rollup update, and it has since been updated to version 2. You can alternatively have Windows Update install it for you.
NOTE: There are several known issues with this rollup update, for which Microsoft has now provided resolutions. Please refer to the aforementioned Knowledge Base article for details and instructions.
Additional Known Issues:
1. Windows Update may return error 0x80240019 the first time you check for updates following the installation of this rollup update. Should this happen to you, simply wait a few minutes and check for updates again.
2. Windows Update may not be able to successfully finish checking for updates, no matter how long you let it run. Should this happen to you, temporarily disable automatic updating, restart your computer, and manually download and install the following update (available from the Microsoft Download Center):
KB3161608 - June 2016 update rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Don't forget to re-enable automatic updating afterwards.
3. Microsoft Office 2010 doesn't start when EMET is enabled. The solution is to download and install the June 2016 update follup for Windows 7 SP1 and Windows Server 2008 R2 SP1 (the same one as for Additional Known Issue 2, above). This Known Issue is documented by Microsoft here:
KB3163644 - Microsoft Office 2010 doesn't start when EMET is enabled in Windows 7 or Windows Server 2008 R2
4. Configuring updates may hang at 13% if certain USB devices (e.g. headsets) are connected when you install the rollup update. If this happens to you, let it timeout and roll back (this will take time -- be patient). Worst case, Configuring updates may freeze, in which case you'll have to power down your computer to have it roll back successfully. Once it has rolled back, unplug all USB devices except for mouse and keyboard, and re-install the rollup update. (Alternatively, you can remove any unnecessary USB devices before installing the rollup update and avoid this issue altogether.)
Additional information regarding Microsoft's change in servicing model for Windows 7:
Microsoft has changed the servicing model for Windows 7 to make it more like the servicing models it introduced in Windows 8, 8.1, and 10. Specifically, this means that instead of releasing hotfixes, Microsoft will be releasing monthly update rollups that contain all the fixes that would have been released as individual hotfixes.
(Editorial: In general, this is a good thing, as it makes it easier to build and maintain OS deployment images. On the down side, if there is a bug in an update rollup, you are stuck uninstalling the entire rollup, as opposed to just the hotfix with the bug.)
Since this Convenience update rollup was released, there has been a correction to one of the hotfixes included in it (kb3139923-v2). Microsoft also released the May 2016 update rollup (KB3156417). Beginning with the June 2016 update rollup (KB3161608), Windows 7 update rollups became cumulative (i.e. the July 2016 update rollup (KB3172605) includes all the fixes in -- and replaces -- the June update rollup.
Updated 2016-08-17: Microsoft has released the August 2016 hotfix rollup (KB3179573). In yet another case of the right hand being clueless as to what the left hand is doing, this hotfix rollup (like the May hotfix rollup) is NOT cumulative, and must be installed in addition to the other post-KB3125574-v4 updates. Here is the Knowledge Base article for KB3179573:
KB3179573 - August 2016 update rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Further, this hotfix rollup corrects a problem in SMB, so I took a look around for other recent Knowledge Base articles that discuss SMB issues, and found this:
KB3181029 - SMB file server share access is unsuccessful through DNS CNAME alias
In the Troubleshooting section, Microsoft still recommends applying KB2775511 and its post-requisite hotfixes. To do this successfully, you should apply them before KB3125574-v4.
Updated 2017-02-28: Since I last updated this article, Microsoft released a servicing stack update for Windows 7:
KB3177467 - Servicing stack update for Windows 7 SP1 and Windows Server 2008 R2 SP1: September 20, 2016
Servicing stack updates should always be deployed as soon as possible after they are released. Microsoft also released an additional non-cumulative update rollup:
KB3185278 - September 2016 update rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Starting in October, 2016, update rollups for Windows 7 became cumulative. As a hotfixer, I am interested by the cumulative updates that include both security updates and hotfixes. Microsoft has designated these as Security Monthly Quality Rollups. The most recently released one is:
KB3212646 - January 2017 Security Monthly Quality Rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1
Microsoft initially had a few problems making the update rollups cumulative. Of particular note, there were issues with supersedence. These now appear to be resolved, and hotfixers can keep their systems up-to-date by installing the most recent Security Monthly Quality Rollup.
-----
What does all of this mean in practical terms? Say you wanted to streamline your Windows 7 installation process. If you choose to follow Microsoft's new servicing model (including its ongoing recommendation to install KB2775511) for Windows 7, start with Windows 7 SP1, and install all of the following:
KB3177467 (the most recent Servicing Stack for Windows 7)
KB2775511 (the enterprise hotfix rollup)
+KB2581608 (to automatically apply a required registry entry, which is not included in the enterprise hotfix rollup)
+KB2752259 (to automatically apply a required registry entry, which is not included in the enterprise hotfix rollup)
+KB2732673 (a post-requisite for the enterprise hotfix rollup)
+KB2728738 (a post-requisite for the enterprise hotfix rollup)
+KB2878378 (a post-requisite for the enterprise hotfix rollup)
KB3125574-v4 (the April 2016 Convenience update rollup)
+KB3139923-v2 (a hotfix that was included in KB3125574-v4, but that has updated since its release)
KB3156417 (the May 2016 update rollup)
KB3172605 (the July 2016 cumulative update rollup)
KB3179573 (the August 2016 update rollup)
KB3185278 (the September 2016 update rollup)
KB3212646 (the January 2017 Security Monthly Quality Rollup)
With 14 updates/hotfixes, you get a basic up-to-date Windows 7 installation that will work well for many users. You could then install additional updates and hotfixes that you want that are not included in KB3125574-v4. (For example, I install the security updates for Internet Explorer and the hotfixes for Remote Desktop.)
12,460 downloads
Updated
-
Windows6.1-KB2830615-x86.msu
By cgthamm
KB2830615 - $MyInvocation.MyCommand object is set to null when you run the script by using PowerShell 3.0 in Windows 8 or in Windows Server 2012258 downloads
Submitted
-
Windows6.1-KB2830615-x64.msu
By cgthamm
KB2830615 - $MyInvocation.MyCommand object is set to null when you run the script by using PowerShell 3.0 in Windows 8 or in Windows Server 2012350 downloads
Submitted
-
Windows6.1-KB2891144-x86.msu
By cgthamm
KB2891144 - Application does not draw polylines correctly when you run it through an RD Session in Windows Server 2008 R2 SP1251 downloads
Submitted
-
Windows6.1-KB2891144-x64.msu
By cgthamm
KB2891144 - Application does not draw polylines correctly when you run it through an RD Session in Windows Server 2008 R2 SP1473 downloads
Submitted
-
Windows6.1-KB3109118-v4-x86.msu
By cgthamm
KB3109118 - WMF 4.0 Update package for Windows 7 and Windows Server 2008 R2
NOTE: To install this hotfix, you must have .NET Framework 4.5 (or later) installed, as well as Windows Management Framework 4.0 (KB2799888).
801 downloads
Submitted
-
Windows6.1-KB3109118-v4-x64.msu
By cgthamm
KB3109118 - WMF 4.0 Update package for Windows 7 and Windows Server 2008 R2
NOTE: To install this hotfix, you must have .NET Framework 4.5 (or later) installed, as well as Windows Management Framework 4.0 (KB2799888).
2,661 downloads
Submitted
-
IE11-Windows6.1-KB3125446-x86.msu
By cgthamm
KB3125446 - Classic ASP applications don't work correctly after security update 3104002 is installed in Windows
NOTE: You must install KB3104002, available from the Microsoft Download Center, before installing this hotfix.
263 downloads
Submitted
-
Windows6.1-KB3125446-x86.msu
By cgthamm
KB3125446 - Classic ASP applications don't work correctly after security update 3104002 is installed in Windows
NOTE: You must install KB3104002, available from the Microsoft Download Center, before installing this hotfix.
224 downloads
Submitted
-
IE11-Windows6.1-KB3125446-x64.msu
By cgthamm
KB3125446 - Classic ASP applications don't work correctly after security update 3104002 is installed in Windows
NOTE: You must install KB3104002, available from the Microsoft Download Center, before installing this hotfix.
508 downloads
Submitted
-
Windows6.1-KB3125446-x64.msu
By cgthamm
KB3125446 - Classic ASP applications don't work correctly after security update 3104002 is installed in Windows
NOTE: You must install KB3104002, available from the Microsoft Download Center, before installing this hotfix.
327 downloads
Submitted
-
Windows6.1-KB3095319-x86.msu
By cgthamm
KB3095319 - You receive an error message when you use GPMC to manage audit policies in Windows203 downloads
Submitted
-
Windows6.1-KB3095319-x64.msu
By cgthamm
KB3095319 - You receive an error message when you use GPMC to manage audit policies in Windows380 downloads
Submitted
-
IE11-Windows6.1-KB3119137-x86.msu
By cgthamm
KB3119137 - "DISP_E_MEMBERNOTFOUND" error and proxy authentication issue in Internet Explorer 11
NOTE: You must install KB3104002, available from the Microsoft Download Center, before installing this hotfix.
201 downloads
Submitted
-
IE11-Windows6.1-KB3119137-x64.msu
By cgthamm
KB3119137 - "DISP_E_MEMBERNOTFOUND" error and proxy authentication issue in Internet Explorer 11
NOTE: You must install KB3104002, available from the Microsoft Download Center, before installing this hotfix.
224 downloads
Submitted
-
Windows6.1-KB3106991-x86.msu
By cgthamm
KB3106991 - Hotfix rollup 3106991 for the .NET Framework 2.0 SP2 in Windows Server 2008 R2 SP1 and Windows 7 SP1192 downloads
Submitted
-
Windows6.1-KB3106991-x64.msu
By cgthamm
KB3106991 - Hotfix rollup 3106991 for the .NET Framework 2.0 SP2 in Windows Server 2008 R2 SP1 and Windows 7 SP1514 downloads
Submitted
-
IE11-Windows6.1-KB3119070-x86.msu
By cgthamm
KB3119070 - Internet Explorer 11 consumes high memory and CPU cycles after you install update MS15-106
NOTE: You must install KB3100773, available from the Microsoft Download Center, before installing this hotfix.
182 downloads
Submitted
-
IE11-Windows6.1-KB3119070-x64.msu
By cgthamm
KB3119070 - Internet Explorer 11 consumes high memory and CPU cycles after you install update MS15-106
NOTE: You must install KB3100773, available from the Microsoft Download Center, before installing this hotfix.
352 downloads
Submitted
-
Windows6.1-KB3084392-v4-x86.msu
By cgthamm
KB3084392 - Windows Server 2008 R2 starts into Windows Recovery Environment147 downloads
Submitted
-
Windows6.1-KB3084392-v4-x64.msu
By cgthamm
KB3084392 - Windows Server 2008 R2 starts into Windows Recovery Environment224 downloads
Submitted
-
Windows6.1-KB3101217-x86.msu
By cgthamm
KB3101217 - Client requests take a long time to execute or COM+ application freezes in Windows 7 SP1 or Windows Server 2008 R2 SP1
NOTE: This hotfix supersedes KB2545479.
171 downloads
Submitted
-
Windows6.1-KB3101217-x64.msu
By cgthamm
KB3101217 - Client requests take a long time to execute or COM+ application freezes in Windows 7 SP1 or Windows Server 2008 R2 SP1
NOTE: This hotfix supersedes KB2545479.
279 downloads
Submitted
-
IE11-Windows6.1-KB3110711-x86.msu
By cgthamm
KB3110711 - File is "moved or deleted" or "cannot be found" error when you download PDF files in Internet Explorer 11 in Windows
NOTE: You must install KB3100773, available from the Microsoft Download Center, before installing this hotfix.
140 downloads
Submitted